Currently out of stock
Over $39.99
Returns
Warranty
- SIDEWALL KIT ONLY: This package includes the fabric enclosure sidewalls only. The roof cover, metal frame, support poles, connectors, anchors, weights and complete carport structure are not included. The frame shown in the images is for display purposes only.
- FOR COMPATIBLE 10 X 20 FT CARPORTS: Designed to fit compatible 10 x 20 FT carport frames with a peak height of up to 11 FT. Measure your existing frame, sidewall height, attachment locations and door positions carefully before ordering. Not a universal-fit replacement.
- 200G PE ENCLOSURE PANELS: Reinforced polyethylene sidewalls provide practical protection from sunlight, light rain, dust, leaves and outdoor debris. The water-resistant and UV-resistant material is suitable for seasonal outdoor use.
- MULTIPLE ACCESS OPENINGS: Front and rear roll-up zipper doors provide convenient vehicle and equipment access, while 2 additional roll-up side openings make it easier to reach stored tools without opening the main entrances.
- 4 ADJUSTABLE MESH WINDOWS: Four mesh windows help improve airflow, natural light and visibility inside the existing carport. Adjustable outer covers can be opened for ventilation or closed for additional privacy and weather protection.
Description
200G PE Carport Sidewall Kit for Compatible 10 x 20 FT Frames
Add or replace the fabric side enclosure on an existing carport with front and rear zippered panels, two side access openings and four adjustable mesh windows. Roof canopy and metal frame are not included.
This package contains the fabric sidewall enclosure only. The roof canopy, top cover, metal frame, support poles, structural connectors, anchors, sandbags and complete carport are not included. Any roof or frame shown in product images is for fitment demonstration only.
Enclose an Existing Carport Without Replacing the Structure
The 200G PE replacement side panels add access, ventilation, privacy and practical side protection to a compatible covered carport frame.
Reinforced PE Sidewalls
Durable polyethylene fabric helps reduce side exposure to sunlight, light rain, dust, leaves and common outdoor debris.
Front and Rear Doors
Roll-up zippered end panels provide convenient vehicle access, equipment loading and flexible entry from either end.
Two Side Openings
Additional roll-up zippered openings provide quicker access to tools and stored items without opening an end door.
Adjustable Mesh Windows
Four covered mesh windows support airflow, visibility and more comfortable access inside the enclosed carport.
Outdoor-Ready Material
The water-resistant and UV-resistant PE fabric is designed for seasonal outdoor enclosure on a compatible existing structure.
Neutral Gray Finish
The understated gray exterior blends easily with driveways, yards, workshops, farms and outdoor storage areas.
Multiple Openings for Convenient Everyday Access
Use the front, rear or side opening that best suits vehicle parking, equipment loading, ventilation and routine access to stored belongings.
Roll-Up Zippered Door
Opens for vehicle entry, equipment movement and everyday access.
Second Zippered Door
Adds another entry point for flexible parking and loading layouts.
Roll-Up Openings
Reach tools or supplies without opening either end of the enclosure.
Adjustable Ventilation
Open or close the covered mesh windows according to airflow needs.
200G PE Sidewalls for Everyday Outdoor Enclosure
Reinforced sidewall fabric creates a practical barrier around an existing covered carport while preserving multiple access points.
- Water-resistant PE helps reduce exposure to passing rain from the sides
- UV-resistant material helps limit fading during regular outdoor use
- Helps block dust, leaves and windblown debris from entering the sides
- Gray finish coordinates with common portable garage and carport setups
- Sidewall panels do not replace a roof canopy or structural frame
Four Mesh Windows Support Airflow and Natural Light
Adjustable outer covers let you balance enclosed storage, privacy, ventilation and visibility according to daily conditions.
- Open the windows to improve cross ventilation through the enclosure
- Mesh supports airflow while helping reduce flying insect entry
- Window openings improve natural visibility inside the carport
- Close the outer covers for added privacy and side protection
- Never run a vehicle engine inside an enclosed carport
Measure Your Existing 10 x 20 FT Frame Before Ordering
Carport frames with the same nominal size may use different sidewall heights, pole spacing, door positions and attachment systems.
Confirm Length and Width
Measure the outside dimensions of the existing carport frame.
Check Frame Height
Verify the peak height, eave height and usable sidewall height.
Inspect Attachment Points
Compare pole spacing, zipper positions and fastening locations.
Designed to Fit Around a Compatible Existing Frame
Correct alignment and even fabric tension help the doors, windows and side openings operate more smoothly after installation.
- Identify the front, rear and side panels before installation
- Align the upper edges with compatible sidewall attachment points
- Avoid excessive tension around doors, windows and zipper seams
- Secure lower edges according to the existing frame instructions
- Anchor the carport frame separately; sidewalls do not stabilize it
Four Steps to Install the Replacement Sidewalls
Installation is easier with two adults. Confirm compatibility and stabilize the existing carport frame before attaching the fabric panels.
Measure the Frame
Confirm length, width, height, pole spacing and all sidewall attachment points.
Identify Each Panel
Separate the front, rear and side sections and locate every door and window.
Attach the End Panels
Align the front and rear zippered doors before fastening with even tension.
Secure the Side Panels
Fasten the remaining sidewalls, then test all zippers, openings and windows.
Side Enclosure for Everyday Outdoor Storage Setups
Add privacy, ventilation and practical side protection to an existing covered carport used for vehicles, boats, tools and outdoor equipment.
Product Specifications
Sidewall material, access features and compatibility details.
| Product Type | Carport Replacement Sidewall Enclosure Kit |
|---|---|
| Package Contents | Fabric Sidewall Panels Only |
| Compatible Carport Size | Compatible 10 x 20 ft Carport Frames |
| Compatible Peak Height | Up to 11 ft |
| Sidewall Material | Polyethylene (PE) |
| Fabric Weight | 200G |
| Color | Gray |
| Front Panel | Roll-Up Zippered Door |
| Rear Panel | Roll-Up Zippered Door |
| Side Access Openings | 2 Roll-Up Zippered Openings |
| Ventilation Windows | 4 Adjustable Mesh Windows with Covers |
| Water Resistance | Water-Resistant Sidewall Fabric |
| UV Resistance | Yes |
| Product Weight | 15.87 lb |
| Package Dimensions | 20.87 x 12.99 x 10.63 in |
| Roof Cover Included | No |
| Metal Frame Included | No |
| Support Poles and Connectors Included | No |
| Anchors and Weights Included | No |
| Installation | Required on a Compatible Existing Carport Frame |
Compatibility, Use and Weather Notice
This replacement carport sidewall kit is not universal. Measure the existing frame and compare its pole spacing, height and attachment points before ordering. The package does not include a roof canopy or structural frame. Install the panels only on a stable, correctly anchored compatible carport, and remove or secure the sidewalls during severe wind, storms or other extreme weather according to the frame manufacturer's guidance.