Currently out of stock
Over $39.99
Returns
Warranty
- 2.5HP High-Flow Performance: The copper-winding motor operates at 3450RPM and delivers powerful circulation for compatible residential pool filtration systems. Confirm the final maximum flow rating before publishing.
- Dual-Voltage 115/230V Motor: Factory configured for 115V operation and convertible for compatible 230V electrical systems. Voltage conversion and wiring should follow local codes and system requirements.
- Self-Priming Pump Design: Designed for above-ground and inground pool systems with a recommended suction-pipe length under 10ft and pump elevation no more than 6.5ft above the water level.
- 1.5in and 2in Connection Options: Includes multiple union fittings for compatible plumbing layouts, while the reinforced inlet and outlet connections support secure installation when properly sealed.
- Clear Strainer Basket Lid: The transparent lid allows quick debris checks without opening the housing, while the removable basket and drain plug simplify routine cleaning and seasonal maintenance.
Description
Powerful Water Circulation for Residential Pool Systems
The 2.5HP self-priming pool pump combines dual-voltage operation, a clear strainer basket and multiple plumbing connection options for compatible above-ground and inground pool filtration systems.
2.5HP Circulation Power
The high-output motor supports efficient water movement through compatible residential pool filtration systems.
Self-Priming Design
The pump is designed to prime from a properly installed suction line after the strainer housing has been filled with water.
Clear Strainer Lid
The transparent lid allows quick inspection of collected debris without opening the pump housing.
2.5HP Performance System
The copper-winding motor operates at 3450RPM and supports consistent water circulation through compatible pool plumbing and filtration equipment.
- 2.5HP motor output
- 115/230V dual-voltage operation
- 60Hz electrical frequency
- Maximum water temperature of 104°F
Multiple Plumbing Connection Options
Included connection components support installation with compatible 1.5in and 2in pool plumbing systems.
- 2in NPT inlet and outlet ports
- Compatible 1.5in union components
- Compatible 2in union components
- Replaceable sealing rings
Factory-Configured for 115V
The pump is supplied in its factory 115V configuration for compatible electrical systems.
Convertible to 230V
The motor can be configured for a compatible 230V circuit according to the wiring diagram and local requirements.
Electrical Installation
Turn off all power before installation or servicing and follow applicable electrical and pool-equipment codes.
Electrical Safety Notice
Voltage conversion, permanent wiring and grounding should be completed according to the product manual and local electrical requirements. Use qualified installation support when required.
Designed for Easier Inspection and Maintenance
Practical pump components simplify routine debris checks, basket cleaning and seasonal drainage.
- Clear strainer lid for quick inspection
- Removable debris collection basket
- Hydrodynamic impeller design
- Drain plug for maintenance and storage
- Ventilated motor housing
Copper-Winding Motor
The ventilated motor structure supports stable 3450RPM operation during regular pool circulation when the pump is properly installed and supplied with water.
- Copper motor windings
- Ventilated exterior housing
- Stable continuous circulation
- Designed for residential pool systems
Self-Priming Installation Requirements
Keep the suction pipe as short and straight as possible, maintain the recommended installation height and fill the strainer housing with water before initial startup.
Under 10 ft Suction Line
A shorter suction pipe helps reduce resistance and supports more reliable priming performance.
Maximum 6.5 ft Elevation
Position the pump no more than 6.5 ft above the pool water level for the recommended self-priming setup.
Prime Before Startup
Fill the strainer housing with water and secure the clear lid before switching on the pump.
Never Operate the Pump Dry
Running the pump without water can damage internal seals and other components. Confirm that the pump housing and suction line contain water before operation.
Product Specifications
| Product Type | Self-Priming Pool Pump |
| Motor Power | 2.5HP |
| Voltage | 115/230V Dual Voltage |
| Factory Voltage Setting | 115V |
| Rated Current | 17.8A at 115V / 8.9A at 230V |
| Frequency | 60Hz |
| Motor Speed | 3450RPM |
| Maximum Water Temperature | 104°F |
| Inlet and Outlet Size | 2in NPT |
| Included Union Sizes | 1.5in and 2in |
| Maximum Priming Height | 6.5 ft |
| Recommended Suction Pipe Length | Under 10 ft |
| Strainer Design | Removable Basket with Clear Lid |
| Recommended Use | Compatible Above-Ground and Inground Pool Systems |
Frequently Asked Questions
Is the pump configured for 115V or 230V when delivered?
The pump is factory configured for 115V operation and can be converted for a compatible 230V circuit according to the wiring instructions.
Can the pump operate without adding water first?
No. Fill the strainer housing with water before initial startup. Self-priming does not mean the pump can safely operate dry.
What pipe sizes are supported?
The pump has 2in NPT inlet and outlet ports and includes connection components for compatible 1.5in and 2in pool plumbing.
Can it be used for above-ground and inground pools?
Yes, when the pump performance, plumbing, voltage and installation requirements match the existing filtration system.
How should the strainer basket be cleaned?
Turn off and disconnect electrical power, close the required system valves, remove the clear lid and clean the basket before reinstalling all components securely.
Can the motor be exposed to rain or flooding?
Install the pump in a dry, well-ventilated area protected from flooding. Do not allow the motor to become submerged.