6 mm Polycarbonate Panels
Transparent panels allow natural light through while providing overhead shade and helping reduce direct rain exposure above compatible entry areas.
Garvee 120" × 40" Clear Polycarbonate Door Awning, 6 mm Outdoor Canopy with Reinforced Brackets for Entry Doors and Windows
7 reviews
$86.40
Sign in for Member Price | Save Now
Out of Stock
Est. Delivery Time: Aug 17 - Aug 19
Currently out of stock
Quantity
1
Free US Delivery
Over $39.99
Over $39.99
$
Easy 30-DayReturns
12-Month
Warranty
Warranty
- 120" Wide × 40" Deep Coverage: The wide canopy spans approximately 10 ft across compatible entry doors, windows, and patio openings, while the 40-inch projection helps reduce direct sun and rain exposure.
- 6 mm Polycarbonate Panels: Transparent polycarbonate panels allow natural light through while providing overhead shade. Aluminum joining strips connect the panel sections for a cleaner finished installation.
- Reinforced Support Brackets: Durable composite brackets help support the canopy when mounted to a structurally sound wall with anchors appropriate for the wall material.
- Sloped Water-Runoff Design: The angled canopy helps guide rainwater toward the front edge. Proper installation slope, wall sealing, and routine removal of leaves or snow are required.
- Two-Person Wall Installation: Includes canopy panels, support brackets, aluminum connectors, mounting hardware, and instructions. Installation time and anchor requirements depend on the wall type and mounting height.
Description
Garvee
120" W × 40" D Clear Polycarbonate Door Awning
Add wide overhead coverage above compatible doors and windows with 6 mm transparent polycarbonate panels, reinforced support brackets, aluminum connectors, and a sloped wall-mounted design.
120 in
Overall canopy width
40 in
Wall projection
6 mm
Polycarbonate panel thickness
2 Adults
Recommended installation team
Measure the Wall & Door Clearance Before Ordering
The canopy measures approximately 120 inches across the wall and projects approximately 40 inches outward. Confirm the available wall width, mounting height, door-swing clearance, trim position, and structural mounting surface before installation.
Practical Overhead Coverage for Doors & Windows
Reinforced Support Brackets
Durable composite brackets support the canopy when mounted to a structurally sound wall using anchors appropriate for the wall material.
Aluminum Joining Strips
Aluminum connectors align the canopy sections and create a cleaner transition between panels during assembly.
Match the Anchors to the Wall Structure
The awning must be secured to a sound structural surface. Supplied hardware may not be suitable for every wall type, especially when siding, stucco, insulation, hollow masonry, or decorative trim covers the structural layer.
Solid Concrete
Use suitable concrete anchors and verify edge distances.
Solid Brick
Anchor into sound masonry rather than relying only on mortar joints.
Wood Framing
Fasten into structural studs or load-bearing wood, not only sheathing.
Stucco or Siding
Pass through the finish and secure the awning to structural backing.
Plan for a Two-Person Wall Installation
Measure & Mark
Confirm width, projection, height, door clearance, and bracket locations.
Assemble the Panels
Connect the canopy sections and brackets on a protected work surface.
Anchor to Structure
Use wall-specific anchors and keep the canopy level with the required slope.
Seal & Inspect
Seal the wall connection as needed and recheck every fastener before use.
- Use a stable ladder, drill, level, tape measure, suitable bits, wrench, gloves, and eye protection.
- Check for electrical wiring, plumbing, trim, and hidden obstructions before drilling.
- Do not mount only to vinyl siding, decorative trim, insulation, or thin exterior panels.
- Maintain the intended slope so water can move toward the front edge.
- Confirm that the door opens fully without contacting the brackets or canopy.
| Brand | Garvee |
|---|---|
| Product Type | Wall-Mounted Door & Window Awning |
| Overall Width | 120 in |
| Wall Projection | 40 in |
| Panel Material | Transparent Polycarbonate |
| Panel Thickness | 6 mm |
| Bracket Material | Reinforced Composite / ABS Brackets |
| Connector Material | Aluminum Alloy |
| Panel Color | Transparent |
| Recommended Location | Above Compatible Entry Doors, Patio Doors & Windows |
| Recommended Wall Types | Concrete, Solid Brick, or Structural Wood Framing with Suitable Anchors |
| Assembly Required | Yes |
| Recommended Installers | 2 Adults |
| Package Contents | Canopy Panels, Support Brackets, Aluminum Connectors, Mounting Hardware & Instructions |